PartnerTech: Enable LPT port

PartnerTech: Enable LPT port

 

LPT Config

If you installed Generic text, but still showing red in system status, open control panel, system, Device Manager, Port (COM & LPT) if LPT doesn’t show, turn the computer off.

Turn back on pressing DELETE (6 times) in the keyboard. Will open a blue screen, choose EXIT

 

    • Related Articles

    • Partnertech SP-850: Installing touchscreen drivers

      The new Partnertech SP-850 terminals that we are now selling come with the touchscreen working out of the box, however, there is a specific set of instructions to install the eGalax driver for this particular terminal, listed below:   1. Navigate ...

    • Partnertech: Setting up CD-70 customer display

      The following steps should be taken when setting up a CD-70 customer display for a terminal:   1. If you do not see any video on the CD-70, download the Displaylink driver: http://www.displaylink.com/downloads/windows 2. Once you are able to see ...

    • Installing/Resetting a Partnertech Receipt Printer (RP-100)

      Question or Problem:Installing or resetting a Receipt printer(RP-100) Solution:  Follow the steps below when connecting an RP-100 to the SP-5514: Connect the printer to an available COM port . Verify all dip switches are OFF except #4 which is ON. ...

    • PartnerTech: Restore to factory settings

      Follow the instructions on the pictures to reset a terminal to factory settings.  

    • How to enable Clover

      1 - We need to confirm MID and Merchant name, as it is registered with Clover. 2 - Ordyx Dev Team will connect that information to the Clovers website. 3 - Clover must confirm the app has been linked. 4 - The customer needs to set the Clover terminal ...