Partner Tech RP630 Printer Network configuration

Partner Tech RP630 Printer Network configuration

Follow these steps below to configure your RP630 network printer:

  1. Download the utility. Partnertech RP-630

  2. Open the PTNetWinConfig utility. 

  3. Click on the Protocol Operation button.

  4. Make sure to select UDP Broadcast(Inter-segment).

  5. Click on the Search Printers button.

  6. If the printer is connected to the same router as the computer, the printer IP address will display.

  7. Click on the printer and then click on IP Parameter Setting.

  8. This brings up a password screen, click OK (Keep the field blank).

  9. While on Fixed IP Address, set the parameters (IP Address, Subnet Mask, and Gateway Address).

  10. Click Ok & then Ok again.

  11. Click Reboot Device and then Ok twice.

  12. Verify the change has taken place by logging into Ordyx on a terminal and going to Health


    • Related Articles

    • How to Install Network Printer Rongta RP 326

      Printer Rongta RP 326 - Remote in BAU - Get the driver utility from here:  https://www.rongtatech.com/category/downloads/4 (Thermal printer tool)  or as well you may get it from ...

    • Ordyx Network Configuration

        Ordyx Network configuration In order for terminals to communicate effectively, the proper network setup has to be implemented. All network devices (computers, printers, handhelds, etc…) must be on the same network. This is essential for the sharing ...

    • Network Printer Troubleshoot

      Steps to Troubleshoot a Network printer: Follow the steps below to troubleshoot a Network Printer. Do keep in mind Tonic is not responsible for the customer printer, however Tonic Support will help the customer troubleshoot their network printer. 1. ...

    • Configuring an SNBC Network Printer using BYNetWinConfig

      Question or Problem: SNBC Network printer configuration Equipment or Software affected: SNBC printer connected to the network. Solution: This is the process of setting up any SNBC printer connected to the system via the network. First make sure the ...

    • Printer Installation

      Printer Installation Version 1.1 This is related to each individual printer. When items are selected in an order, they are sent to the printer assigned to it. IE: A liquor item will only print to the bar printer and not the kitchen printer. When an ...