How to configure Epson TM-T88VI with WIFI
How to configure Epson TM-T88VI with WIFI
This printer has a connector WIFI trough USB
To configure de adapter you must reset the printer to factory default, to do this:
1- Turn off the printer
2- Press and hold the Feed button
3- Turn on the printer and a test page will be printed, press again the feed button for 2 seconds and a second page called Mode Selection will be printed
4- Press 5 times and press again to print the Interface Setup, select 1 pressing 1 more time Feed button and press again to print WIFI & Ethernet Setup
5- Select option 1 to reset to Factory Default, release the feed button.
Once you do this, the printer is resetting to Factory Defaults.
Now follow Configuring the Adapter using AP Mode
Keep in mind that you need to know the WIFI Network Name and password.
Related Articles
Epson Printer DIP Switch Settings
There are a few situations where a customer will need to change the DIP switch settings on a printer. The most common is when changing interface cards. The DIP switch settings on an Epson printer are typically located on the bottom of the printer, ...Star SP700 Printers how to emulate Epson Printer
The Star SP700, by default, comes set to use its native Star mode for printing. If need be, using the hardware’s dip switches, you can set it for Epson mode. You usually don’t need to set your printer for Epson mode. However, Epson mode prints ...POSBank A10 Network/WiFi Setup
The following steps will help you configure a POSBank A10 to work with Ordyx. 1. Start by having the customer connect the printer to the network on which Ordyx is located. This must be via ethernet cable. 2. Have the customer power on and reset the ...How to configure the Scanner on Ipad
If the customer wants to use the scanner for barcodes on Ipad You must install the Ipad as a Terminal, it doesn't work as a HH, once you configure it as a terminal go to the store setting, the bar code reader tab should be blank. Open Ordyx and you ...When OrdyxOne won´t execute from Windows
When OrdyxOne won´t execute from Windows Version 1.1 In an scenario where the Ordyx executable doesn't open regardless of how many times you try to execute it with no duplicated processes there may be a conflict with the UAC (User Account Control) ...