Alerts Setup

Alerts Setup


Alerts


Ordyx enable users to receive notifications via email or text to keep them informed on what is going on in the store with out being on site. To setup alerts you will need to:




1. Find your profile under the staff list and scroll to the section with the alert button and click alerts.




  1. Check the box of the alert you wish to receive and verify the email address is where you want to receive the alerts. Input your cell phone number and choose your phone carrier from the dropdown on the far right labeled Provider if you want to receive text messaged alerts and save. {Save is at the top of the alert window. }


  1. Once saved, selections will turn red and you will receive email confirmation for each alert you checked off. So If you check off 3 alerts you will get 3 separate emails to confirm. Once you confirmed the emails you will begin to be alerted of the task you chose.




    • Related Articles

    • Alerts

      Alerts This section will display all of the text alerts that are being sent to cell phones. They are created in the staff file, but this is one other way to view them. Support only has this section, not the customer. The list shows the name of the ...

    • Staff Card Setup / Assignment

      To assign staff cards to users: 1. Go to Setup on the terminal 2. Click on the Staff Card option 3. Select the user 4. Swipe the card on the MSR 5. Click on associate **IMPORTANT NOTE** Ordyx only reads Track1 information for staff cards. Follow ...

    • Dejavoo Setup and configuration

      DejaVoo EMV Setup Follow the steps below to set up a Dejavoo Emv. 1. When configuring a Dejavoo terminal the first thing you should do is remote into the terminal, and ask the customer which IP address to use and the DHCP range if the customer does ...

    • Clover Setup in BOH

      To set up Clover on BOH, you need to make sure you have the correct Communication settings which will be provided once the Rest Pay Display app is started. On the drop-down for the type, select Clover From the options list, make sure that Credit, ...

    • POSBank A10 Network/WiFi Setup

      The following steps will help you configure a POSBank A10 to work with Ordyx. 1. Start by having the customer connect the printer to the network on which Ordyx is located. This must be via ethernet cable. 2. Have the customer power on and reset the ...